Rain Gutters and Repair – 4 Common Issues

Have you been putting off your rain gutter repairs for far too long now? They barely seem like an emergency, but you should treat them as one. Rain gutters protect your home from water damage by keeping the water off your structural components.

Granted, when you installed them, you probably expected that you will never have to fetch your ladder to repair them anytime soon. However, due to wear and tear, you may start to notice leaks that are causing water damage to your walls.

Luckily, this article highlights the most common types of rain gutter repairs and how to deal with them permanently. But before we explore the different ways to repair your rain gutters, the problem you are facing is likely a common occurrence.

Here are some of the most common repairs that you will encounter:

Common repairs for rain gutters

• Leaking Rain Gutters
• Overflowing Rain Gutters
• Sagging Rain Gutters
• Clogged or Loose Gutter Downspout

Rain Gutters and Repair: 4 Common Problems

1. Fix Your Leaking Rain Gutters

Leaking rain gutters are primarily caused by faulty joints in between the gutter sections. These joints may have been improperly fixed or have rusted with time due to ponding water in the gutters. When repairing, first allow the gutters to dry completely before applying gutter caulking compound along the inside and outside seams of the sections.

2. Are Your Rain Gutters Overflowing?

Overflowing gutters may lead to discoloration of your walls and damage your roof foundation. When repairing overflowing gutters, first check if the gutters are clogged with debris.

The gutters may also not be wide enough to accommodate seasons of heavy downpour. For clogged gutters, simply removing any leaves from the gutter or installing a mesh over the gutter will prevent water from overflowing.

3. Sagging Rain Gutters

Gutters tend to sag when they are full of water. In particular, gutters made from galvanized steel, aluminum, and other light materials will sag when full of water. They are typically not able to hold a lot of weight so when they don’t dispel rainwater efficiently, they sag.

To repair sagging gutters, first, check if the slope of the gutter has dropped significantly since installation. If so, replace or re-seat the hangers that support and hold the gutters in place.

4. Clogged Gutter Downspout

Downspouts are where rainwater exits the gutter. When clogged or loose, rainwater pools within the gutter resulting in damaged outlets and sections.

To repair the downspouts, remove its elbow and clear out any debris. Afterward, drill holes into the downspout sections and elbows and proceed to fasten them together with galvanized sheet metal screws.

Wind Up

Rain gutters and repairs are a job best left to the experts. No matter the kind of repair job your gutters require, you can be assured that our team of experts is ready and well-equipped to provide quality repair services. Contact us today for the best rates in town!